Technochem Industries

2 K HOT AIRLESS SPRAY PAINTING SYSTEM :

 

Product Description :

 

System Comprises of Airless Pump with Heated Hoses system , Automatic Ratio Control Fluid Flow meters through HMI Electro Pneumatic Control Panel.

When Thick Coating Paints are to be applied on Object for Base & hardener system,

Paints need to be heated to reduce Viscosity of paint for smooth flow of Paints.so that it is convenient to apply Material on Object thought airless Spray System.

 

For Internal Pipe coating, Automatic rotating Nozzles are being used.

With Boom. System is mounted on wheel mounted Trolley .

 

Electrical Stirrers will mix the base and hardener for Homogeneous consistency.

High Volume transfer pumps will transfer the base & hardener for Tank to the Manifold Flushing pumps will be mounted in between Transfer Pump & Mising Pumps.

High pressure 2K Pump with Two suction Hydraulic Pump will measure and transfer base & haedener  to the Mixing pro Static Mixing Chamber.

Further heated Paints goes to the automatic Spray Gun for Internal painting through Heated High Pressure  Hoses.

TECHNICAL  SPECIFICATIONS  :  

Metering                                  Flow Control valves.

AFR with gauge                      Max 7 bar.

Air Header                               max 7 bar.

Paint Container                       Hot Jacketed ; 50 ltr

Paint Hose                              High Pressure Heated Heated.

Wheel                                     Tyre Wheel; Four no.

AIRLESS   SPRAY  PAINTING   EQUIPMENTS

Airless Spray Painting Equipment  is used for faster painting work. It mainly used were High Dry Film Thickness is desired.  It is suitable for mostly Spray Painting of Larger surfaces like Ship Building , Huge Pipe , Railway Coach, Heavy Fabrication & steel structures, Road Markings, Refinery, Steel Bridges etc.

In this system , Paint is atomized at around 100 to 550 Bar  inside the gun, which is forced through  small Tungston Carbide Nozzle of High Pressure Airless Spray Gun.  Due to pressure difference between Gun & atmosphere, we get spray for painting purpose.  Compressor air is required to operate the Air motor of Piston Pump.  Hydraulic piston increase the pressure  of fluid as we increase the pressur of compressor Air. 

This system sprays very viscous  paints such as Epoxy, PolyUrethane, Coal Tar Epoxy, High Solids Coatings etc. 

TECHNICAL SPECIFICATION

1. Ratio                       1:30                            1:45                   1:65                      1: 75.
2. Fluid Output           6.00 L/Min.              17L/Min.          
3. Air press.                 7 Kgf/cm2.               8 Kgf/cm2          8 Kgf/cm2           8Kgf/cm2

4. Air Volume              5 Litre/cycle
4. H.P. Pressure          280 Kgf/cm2.

 

5.Output per Cycle    150 cc
5. Paint Filter              High pressure.
6. Mounting                Wheel Trolley

We are presenting our valued clients a wide array of Painting Accessories and Tools such as Pressure Feed Containers from us that are extensively used to facilitate preparation of coating materials. We use stainless steel and mild steel for its construction and offer it in a wide spectrum of capacities. These can be attached to an automatic agitator if needed. We can also supply feed and flush system that consists of two or more containers.

Features:

• Rigid construction
• Flawless finish
• Corrosion proof

The Putty Spray Machine TECH - R750 From Technochem Industries is designed for spraying of Building wall putty and water based Emulsion Paints.