Technochem Industries

• High performance Die Coat Spray gun with high transfer efficiency. Used for spraying fine spray with minimum overspray bounce back.
• It has very small nozzle. Input of Air & Fluid both at from one place,for better accuracy.
• Continuous spraying can be achieved by feeding fluid materialy pressure feed container. 
• This gun is light weight, Fluid path is Stainless Steel.
• Air Cap of Nozzle is having special arrangement for spraying Flat pattern.

• Wide range of applications
• Sturdy construction
• Ergonomic design

High Performance Spray Painting Gun. Centre Gravity cup ensures operator balance for easy handling of gun during painting process

Most widely used in Painting industries due to Ergonomic balance of gun, Higher transfer efficiency, Light weight gun,Stainless Steel fluid path.

• Sturdy construction
• Operator convenience
• Dependable performance

• Ease of operation
• Stability
• Fine output

Features :

• Dual Head Nozzle Spray Gun is Mainly used wherein two fluids/ paints are to be sprayed separately. 
• Two component paint or fluid are stored in independant Suction feed Pot or pressure feed container.
• From where they mixed after tip of Nozzle at around 6 inches distance from nozzle.

These system are mainly used in.

• Two colour Sprayint.
• Nano Colour Coating,plating/
• Laser colouring.
• High Precision Electronic components.
• Two Component system.
• Low viscose material can be easily sprayed in this system.

Applications:

• Handicraft surface plating.
• Mobile phone shell plating.
• Jewelry surface spraying
• Heel surface coating, etc.

office & store good purpose - manual osaka disinfection chemical sprayer

disinfection sanitizer sprayer manual to be sprayed on boxes, goods, raw material. .

description

in this system, water based sanitizer chemical is sprayed with the help siphon spray gun. Bottom 500 ml cup will be having material which will be sprayed through mini air compressor. Equipment  is self operating. Compressor will have small tank. It is having

auto on/off system. It is light weight and handy to move from one place to other cabin.   .

technical specification :

1. Model                                         :  osaka w 106

2. Type                                           :  pneumatic

3. Max  pressure                            : 2-3 00 kgf/cm.

4. Bottom cup cap.                          : 500 ml

5. Power supply                             : 230 volts, 50 hz. Single phase.

6. Nozzle size                                  inches.

High performance Spray gun with high transfer efficiency of Paint. Used in mass production painting work, Converised painting line, Continuous spray painting work, Gun can rotate at any direction during painting, This gun is light weight, Fluid path is Stainless Steel, Air adjusting knob is built on gun itself.

• Excellent maneuverability
• Supreme finish
• Flawless performance

• This is high performance pressure feed spray gun.
• The main suitable application purpose of this gun is bigger jobs, mass production painting work and continuous spray painting work.
• This gun is made up off stainless steel material with air adjusting knob and light weight structure.

These are extensively used for small spray patterns and are gravity feed spray guns. and reduce atmospheric over-spraying to maintain cleanliness in working area.These have wide ranging applications in touch up, scratch removing, marking, stenciling, small spray width painting and hobby work.
Features:

Wide range of applications

Sturdy construction

Side Cup

High performance Mould Release Spray Gun with high transfer efficiency. Used for spraying fine spray with minimum overspray and bounce back

Features:

• It has very small nozzle. 

• Input of Air & Fluid both at from one place for better accuracy.
• Continuous spraying can be achieved by feeding fluid material by pressure feed container. 
• This gun is light weight, Fluid path is Stainless Steel.

SUCTION FEED SPRAY GUN

Model W 206S

This gun is having paint feeding cup from the bottom side of the gun.
Paint gets sucked due to venturi action of compressor air.

Centrally balanced suction feed cup enables painters to operate gun easily
from bottom side of the jobs without interruption of cup. Aluminium cup ensures
rigid handling during operation of painting.

Features :

• This gun is having paint feeding cup from the bottom side of the gun. 
• Paint gets sucked due to venturi action of compressor air.
• Centrally balanced suction feed cup enables painters to operate gun easily from bottom side of the jobs without interruption of cup. 
• Aluminium cup ensures rigid handling during operation of painting.

• Uniform finish
• Easy to operate
• Light Weight

• High performance Spray gun with high transfer efficiency of Paint. 
• Used in mass production painting work, 
• Conveyorised painting line, 
• Continuous spray painting work, 
• Gun can rotate at any direction during painting, 

2.Mobile phone shell plating.

3.Jewelry surface spraying

4.Heel surface coating, etc.