OSAKA HVLP Spray Guns
High Temperature Chain Oil
|Packaging Size||5, 10, 15 Ltr.|
|Service Temperature Minimum Maximum||-15 TO 270|
High Temp. Chain Oil IM HTL 300
It is mainly used in Conveyor
are from bio-based lubricant product range. Being bio-based, they have very high lubricity compared to petro or synthetic high temp. chain oils. This can be verified from very low four ball scar diameter in TDS.
INSTRUCTION FOR APPLICATIONS
Clean with Dirghayu bio-based spark clean cleaner.
This will ensure best removal of rust, oil and dust from chain.
Apply the lubricant by brush, dip or immersion or using suitable of auto lubrication unit from Intech, if required).
Check the drop in drive current after, application and watch it during use. The re-oiling will be due when the drive current rises to original dry level.
In case of powder coating or sand blasting, pl. ensure that, dry powder or sand is not reaching to conveyor chain. Pl. refer to our note on preventive systems.
Conveyor chains, sliders, joints or movements operating at high temp. in ovens or near furnaces. This is applicable to 2 , 3 or 4 wheel chain conveyors or slat conveyors on ground or overhead . In case of I Beam conveyors, there is option to lubricate the bearings & joints suitable grease as per temp.